1. Flow: 200 m³/h~48000 m³/h

2. Head: 1.5m~30m

3. Power: 3kW~1250kW

4. Voltage: 380V~10kV

5. Caliber: 200mm~31800mm 

1. Rainwater drainage.

2. Farmland water conservancy irrigation and drainage.

3. Forced circulation of circulating water.

4. Drainage for flood control and emergency rescue.

5. River water absorption.

6. Domestic water supply and drainage.

7. Extraction of source water from waterworks.

8. Reflux water transportation of sewage treatment plants. 

1、The mixed-flow impeller is integrally cast to enhance strength, increase reliability, control clearance, and improve efficiency; The axial flow impeller adopts split semi-adjustable design to adapt to different working conditions with large flow variations and wide head ranges.

2、The motor's protection class is IP68, the rated voltage is 380V, 660V, 6000V and 10000V, the rated frequency is 50Hz or 60Hz, with variable frequency operation duty system of S1, and the insulation grade is F, or H for special requirements.

3、The optimized design of the electromagnetic scheme is performed to improve efficiency, reduce energy consumption and noise, superior to the national standard GB/T24674-2021; According to the working conditions, the motor can be designed to operate at the variable frequency of 25Hz - 50Hz.

4. The high and medium-speed electric pumps adopt direct-coupled rotation, while the low-speed electric pumps adopt hard-toothed surface planetary gears for deceleration.

5. The electric pump is equipped with humidity and temperature sensor to enhance product reliability.

6. Different installation forms are adopted based on the working conditions: suspended, overflow type and ground-based wellbore. The installation surface of the wellbore adopts inclined self-locking installation and is equipped with anti-rotation and anti-lifting devices to prevent seal leakage and cable damage caused by the rotation of the electric pump; The cable is fixed in special method to prevent damage caused by cable shaking due to water flow.